Prof. Tokeer Ahmad is graduated from IIT Roorkee and Ph.D. from IIT Delhi. Presently, he is full Professor at Department of Chemistry, Jamia Millia Islamia, New Delhi since 2019. Prof. Ahmad has supervised 16 PhD’s, 79 postgraduates, 10 projects, published 203 research papers, one patent and three books with research citation of 8080, h-index of 53 and i10-index of 163. Prof. Ahmad is active reviewer of 186 journals, delivered 178 Invited talks, evaluated 65 external doctoral theses and presented 130 conference papers. Prof. Ahmad is the recipient of CRSI Bronze Medal, MRSI Medal, SMC Bronze Medal, ISCAS Medal, Inspired Teacher’s President of India Award, DST-DFG award, Distinguished Scientist Award, Maulana Abul Kalam Azad Excellence Award of Education, Teacher’s Excellence Award and elected as Member of National Academy of Sciences India. Prof. Ahmad has been figured in World Top 2% Scientists for consecutive four years since 2020 in both coveted lists including career long by Stanford University, USA. Prof. Ahmad has been recently admitted as Fellow of Royal Society of Chemistry (FRSC), UK.
Show MoreDr Woo has a BS and MS in Mechanical Engineering, and he has obtained PhD in Mechanical Engineering from Texas A&M. He majors in energy system such as HVAC and its heat transfer, optimal design and control of refrigerator, reliability design of thermal components, and failure Analysis of thermal components in marketplace using the Non-destructive such as SEM & XRAY. In 1992.03–1997 he worked in Agency for Defense Development, Chinhae, South Korea, where he has researcher in charge of Development of Naval weapon System. He was working as a Senior Reliability Engineer in Refrigerator Division, Digital Appliance, SAMSUNG Electronics. Now he is working as associate professor in mechanical department, Ethiopian Technical University.
Show MorePaulo C. DE MORAIS (H-60), PhD, was full Professor of Physics at the University of Brasilia (UnB) – Brazil up to 2013, Appointed as UnB’s Emeritus Professor (2014), Appointed as Guest Professor of Huazhong University of Science and Technology – China (2011), Visiting Professor at Huazhong University of Science and Technology (HUST) – China (2012-2015), Appointed as Distinguished Professor at Anhui University (AHU) – China (2016-2019), Appointed as Full Professor at Catholic University of Brasília (UCB) – Brazil (2018), Appointed as CNPq-1A Research Fellowship since 2010. 2007 Master Research Prize from UnB, 2008-member of the European ERA NET Nanoscience Committee, Member of the IEEE-Magnetic Society Technical Committee, Senior Member of the IEEE Society, 2012 China’s 1000 Foreign Expert Recipient, and 2012 Academic Excellence Award from Brazilian Professor’s Union. He held two-years (1987-1988) post-doc position with Bell Communications Research – New Jersey, USA and received his Doctoral degree in Solid State Physics (1986) from the Federal University of Minas Gerais – Brazil. He graduated in both Chemistry (1976) and Physics (1977) at UnB. Professor Morais is member of the Brazilian Physical Society and the Institute of Electrical and Electronics Engineers – IEEE. He has served as referee for more than 50 technical journals, takes part of the Editorial Board of more than 15 technical journals and has conducted research on nanomaterials for over 40 years. He has delivered about 190 Invited Talks all over the World. He is known for his research in preparation, characterization and applications of nanosized materials (magnetic fluid, magnetoliposome, magnetic nanoemulsion, magnetic nanocapsule, magnetic nanofilm, magnetic nanocomposite, nanosized semiconductors, polymeric dots, carbon dots, and graphene quantum dots). With more than 500 published papers in peer reviewed journals, more than 13,000 citations, and 16 patents, He has appeared in recent World ranking of top scientists, such as 2020-Stanford, 2022-Research.com, 2023-AD Scientific Index, and 2023-Research.com.
Show MoreIbtisam Kamal is a Professor of Process Engineering. She worked as an academic staff member at the faculties of engineering in Iraqi Universities (Basrah and Baghdad), and La Rochelle University-France. Currently, she is the Head of Petroleum Engineering Department, Alfarqadein University College, Basrah, Iraq. Prof. Ibtisam Kamal research activity is documented by more than 180 scientific peer-reviewed papers and 2 patents one of them European, she supervised more than 40 post-graduate theses. She has participated as a keynote and invited speaker at dozens of national and international conferences, and she has also served as a consultant in the petroleum and petrochemical industries. She is a member of ACI and the editorial board of many international journals. One of her main research interests has focused on simulation, optimization, and modeling the production processes of materials namely biofuels, eco-friendly drilling fluids, and smart building materials incorporated with green nanoparticles.
Show MoreProf. Wael Abdelmoez is a distinguished Professor of Environment and Energy with over three decades of experience in chemical engineering, particularly in the fields of polymer science, biopolymers, and biodegradable plastics. He obtained his Ph.D. in Chemical Engineering from Osaka Prefecture University, Japan, where he developed novel techniques for synthesizing biodegradable plastics using sub-critical water technology. His extensive work includes the synthesis and characterization of biopolymers, the development of bioreactor designs, and innovative environmental processes.
Show MoreMD. SANAUL RABBI, PH.D. Professor, Department of Mechanical Engineering Head, Department of Petroleum & Mining Engineering Additional Director, Institutional Quality Assurance Cell (IQAC) Chittagong University of Engineering & Technology (CUET) Chattogram-4349, Bangladesh
Show MoreMiguel Ángel Hidalgo S. Ph.D., Professor Faculty of Engineering and Basic Sciences GITEM Coordinator (Cat. A1 Minciencias) Senior Researcher Minciencias Universidad Autónoma de Occidente - Cali – Jamundí
Show MoreThi-Hiep Nguyen School of Biomedical Engineering, International University, Vietnam National University - Ho Chi Minh City International University, Vietnam (Assoc. Prof)
Show MoreProf. Fadlelmoula Abdalla Idris Hassan Full proffessor at Faculty of Industries Engineering and technology, University of Gezira. PhD. in textile engineering, l had basic degree from Lahore University of engineering and technology Pakistan. Master degree from Dong hua University China, and Ph.D from University of Gezira. Suadn. My research are mainly in composites, functional fabrics structures and properties , smart fabrics , fabrics simulation and antimicrobial treatment , I have developed three software programs in fabric structures and color matching, The current projects is Early detection of breast cancer using fabrics embedded sensor using microwave the second project is utilization of agriculture waste in building. University of Gezira Sudan
Show MoreD. P. Chattopadhyay, PhD, recently retired as a Professor from the Textile Chemistry Department at Maharaja Sayajirao University of Baroda, India, where he served as Head of the department from 2011 to 2017. Prof. Chattopadhyay earned his PhD under the mentorship of Prof. R. B. Chavan at the Indian Institute of Technology (IIT), Delhi. He holds a master’s degree from IIT Delhi and a bachelor’s in technology from the University of Calcutta. Prof. Chattopadhyay's primary research interests include biopolymers, the synthesis and application of nanoparticles in textiles, and sustainable textile processing methods. He is recognized as a Fellow of the Textile Association of India and is actively involved in national and international academic circles. In 2018, he was invited to deliver a keynote address at the International Conference on Recent Multidisciplinary Research (ICRMR) in Bangkok, and in 2011, he was invited to chair a technical session at the Asian Textile Conference in Seoul, South Korea. He presented research papers at the University of Mauritius in 2012. He has published extensively in both national and international journals and received the best paper presentation award at a national conference in 2010. Additionally, he has contributed invited chapters to various academic books. Among his doctoral mentees was a scholar who received a postgraduate fellowship from TWAS, Italy, to pursue sandwich doctoral research. Prof. Chattopadhyay serves on editorial boards and as a reviewer for numerous international journals. He has coordinated multiple government-sponsored projects and has been appointed as a PhD thesis evaluator for prestigious institutions, including IIT Delhi, the University of Calcutta, Jadavpur University, ITM University in Gwalior, Anna University in Chennai and many more.
Show MoreProf. Blaž Likozar is the head of the Department of Catalysis and Chemical Reaction Engineering at the National Institute of Chemistry (NIC), leading the program “Chemical Reaction Engineering,” as well as numerous research projects (15 H2020 / 50 in Horizon Europe alone). His expertise lies (among others) in heterogeneous catalysis materials, modelling, simulation and optimisation of process fluid mechanics, transport phenomena and chemical kinetics. He worked as a Fulbright Program researcher at the University of Delaware from 2014 to 2015. He has authored >360 articles, was cited >10000 times, having a h-index of 58. He is also involved in many industrial projects, including TotalEnergies, Evonik Industries, UPM, Novartis, and Carbon Recycling International.
Show MoreZhenzhen Yang earned her Ph.D. in organic chemistry from Nankai University in 2013. Then she joined the Institute of Chemistry, Chinese Academy of Sciences as an assistant professor,then became an associate professor two years later, and worked there for five years (2013-2018). Afterwards, she worked as a postdoctoral researcher at the University of Tennessee, Knoxville (UTK) (2018-2020). She began to work in the Chemical Sciences Division of Oak Ridge National Laboratory (ORNL) in 2020 and currently works as a R&D research scientist. Her research is mainly focused on developing functionalized nanomaterials for the efficient adsorption/separation, activation, and conversion of small gas molecules. She has published more than 200 papers in reputed journals in related research fields.
Show MoreDr. Nur Izzah Md Fadilah is a senior lecturer in the Department of Tissue Engineering and Regenerative Medicine (DTERM) at the Faculty of Medicine, Universiti Kebangsaan Malaysia (UKM). She also serves as the Honorary Secretary for the UKM Research Group on Advanced Bioactive Materials and Cells (Adv-BioMac). She is actively engaged in international collaboration as one of the Secondment Researcher for the Shaping Innovative Designs for Sustainable Tissue Engineering Products (SHIFT) Project under the European Horizon 2020-UKM initiative, working at the Health Technologies Institute (HTI) and Institute of Translational Medicine (ITM), University of Birmingham, United Kingdom (UK). She earned her PhD in Medicinal Chemistry from Universiti Putra Malaysia (UPM), where her academic excellence was recognized with several prestigious accolades, including the Professor's Commemorative Prize, Excellent PhD Student Graduated Award, and multiple Dean’s List Academic Awards. Her expertise spans a range of cutting-edge fields, including peptides, skin wound healing, tissue engineering, regenerative medicine, medicinal chemistry, and 3D bioprinting technology. She has an impressive academic portfolio, having authored over 30 publications as the first- and co-author in high-impact domains such as biochemistry, biomaterials, and tissue engineering. She is also an active participant in national and international innovation, exhibitions, earning numerous awards, including gold, silver, bronze medals, and a Special Award for Inventors, reflecting her contributions to scientific and technological advancements. Her career exemplifies a strong commitment to research, innovation, and international collaboration, establishing her as a prominent figure in the field of tissue engineering and regenerative medicine.
Show MoreGuilherme Deomedesse Minari graduated in Technology of Biofuel from Technology College of Jaboticabal, Brazil (FATEC), has a Master's Degree from the University of São Paulo State (UNESP) campus Jaboticabal and completed his PhD at 31 years from the 1University of São Paulo State, UNESP, campus Rio Claro – São Paulo State, Brazil. He has published some papers in journals with high impactor factors,” Chemosphere, Ecotoxicology and Environmental Safety and Microorganisms” and is looking for an opportunity in your career, also He is studying at Eastern University Philadelphia -PA, USA.
Show MoreDr. Fang Qinghong, a professor at Shenyang University of Chemical Technology, is currently serving as the director of the Key Laboratory of Rubber Elastomers in Liaoning Province and is positioned as the vice chairman of the Rubber Professional Committee of the Chinese Chemical Society. Participation in several International Rubber Conferences (IRC) has been undertaken, where invited presentations have been delivered. Membership on the academic committees for both the IRC 2023 International Conference and the 2024 World Conference on Elastomer Technology and Engineering has been conferred upon him. His research is primarily focused on the fundamental and applied studies of bio-based Eucommia gum, with outcomes that include modification of rubber with Eucommia gum has been achieved, alongside the development of toughened plastics containing Eucommia gum, shape memory materials, and materials intended for electromagnetic shielding and absorption. A first-class award for technical invention in Liaoning Province has been awarded for his research achievements. Over 230 academic publications have been authored, and authorization for 20 invention patents has been received.
Show MoreDr Jitendra Kumar Katiyar holds the position of an Assistant Professor at the Centre for Research Impact & Outcome (CRIO), Chitkara University, Panjab, India. Additionally, He holds the position of local coordinator for the Global Initiative of Academic Network (GIAN) program started by the Ministry of Education at Chitkara University. He has 11 years of total teaching and research experience; his Scopus ID is 57150631600 and his Google Scholar ID is https://scholar.google.co.in/citations?user=HPlbnjwAAAAJ&hl=en. His research interest includes modern manufacturing techniques, tribology of carbon materials, polymer composites, self-lubricating polymers, lubrication tribology, and coatings for advanced technologies. He obtained his bachelor's degree from UPTU Lucknow with Honours in 2007. He received his master's from the Indian Institute of Technology Kanpur in 2010 and his PhD from the same institution in 2017. He is a life member of the Tribology Society of India, the Malaysian Society of Tribology, the Institute of Engineers, India, and The Indian Society for Technical Education (ISTE). He is elected Executive Committee Member, of the Tribology Society of India (2024-2026). He has authored/ co-authored/ published more than 95+ articles in reputed journals, 44+ articles in international/national conferences, 22+ Book Chapters, and 16 books published in Springer, Elsevier and CRC Press USA. He holds the position of Associate Editor in the IMechE Part J: Journal of Engineering Tribology, a Member Editorial Board in Tribology-Materials, Surfaces and Interfaces and a Review Editor in Frontier in Mechanical Engineering and Frontiers in Materials. Further, he has effectively served as a guest editor for a special issue in Tribology International, Tribology Materials, Surfaces and Interfaces, Journal of Engineering Tribology Part J, Journal of Process Mechanical Engineering Part E, Arabian Journal for Science and Engineering, Industrial Lubrication and Tribology, Material Science and Engineering Technology, and Frontier in Mechanical Engineering: Tribology. Moreover, he currently holds the position of guest editor for the special issue TURKEYTRIB 2023 and Tribology of Additive Manufacturing and Micro/Nano-Structured Surfaces in the Journal of Engineering Tribology Part J, Composites and Advanced Materials, Sage Publication and Industrial Lubrication and Tribology for the special issue TRIBOINDIA 2023, Emerald Publication. He is also an active reviewer in 30+ reputed materials, manufacturing, and tribology journals. He has also delivered over 55+ invited talks on various research fields related to tribology, composite materials, surface engineering and machining.
Show MorePaulo C. DE MORAIS (H-60), PhD, was full Professor of Physics at the University of Brasilia (UnB) – Brazil up to 2013, Appointed as UnB’s Emeritus Professor (2014), Appointed as Guest Professor of Huazhong University of Science and Technology – China (2011), Visiting Professor at Huazhong University of Science and Technology (HUST) – China (2012-2015), Appointed as Distinguished Professor at Anhui University (AHU) – China (2016-2019), Appointed as Full Professor at Catholic University of Brasília (UCB) – Brazil (2018), Appointed as CNPq-1A Research Fellowship since 2010. 2007 Master Research Prize from UnB, 2008-member of the European ERA NET Nanoscience Committee, Member of the IEEE-Magnetic Society Technical Committee, Senior Member of the IEEE Society, 2012 China’s 1000 Foreign Expert Recipient, and 2012 Academic Excellence Award from Brazilian Professor’s Union. He held two-years (1987-1988) post-doc position with Bell Communications Research – New Jersey, USA and received his Doctoral degree in Solid State Physics (1986) from the Federal University of Minas Gerais – Brazil. He graduated in both Chemistry (1976) and Physics (1977) at UnB. Professor Morais is member of the Brazilian Physical Society and the Institute of Electrical and Electronics Engineers – IEEE. He has served as referee for more than 50 technical journals, takes part of the Editorial Board of more than 15 technical journals and has conducted research on nanomaterials for over 40 years. He is known for his research in preparation, characterization and applications of nanosized materials (magnetic fluid, magnetoliposome, magnetic nanoemulsion, magnetic nanocapsule, magnetic nanofilm, magnetic nanocomposite, nanosized semiconductors, polymeric dots, carbon dots, and graphene quantum dots). With more than 500 published papers in peer reviewed journals, more than 13,000 citations, more than 200 international invited talks, and more than 15 filed patents. He has appeared in recent World ranking of top scientists, such as 2020-Stanford, 2022-Research.com, 2023-AD Scientific Index, 2023-Research.com, 2024-Elsevier, and 2025-AD Scientific Index.
Show More